Installing A Fence Guide

Installing A Fence Guide

The message that it is your territory is transmitted by having a fence on your property. With a fence, you also protect your belongings. All by yourself, you can instal a fence. To do the work for you, you do not need to hire a professional. All you need to do is know what to do and how to go about it. find more info about us

1. Determine your distance
You have to determine how far you’re going to set your fence posts apart. These are usually spaced six to eight feet apart, but it depends on how big your lawn is. It is necessary to set the corner posts first. Then all of the posts in between should be aligned. To serve as your reference, extend a line from every corner. Mark the exact positions for the post where you would like to dig each hole.

2. Prepare posts and holes
Make sure that 1/3 of every post sticks to the ground when setting up the fences. This makes it easier when the weather becomes harsh for the post to bear the heavy weight and strong winds. As there is a risk of this occurring over time, you can use a wood preservative to prevent the wood from rotting.

3. Set Posts
Place the bottom of the post hole with two to three shovel scoops filled with gravel. Before you put the post into position, this should be done. Using the level to plumb the post. Once the posts have been positioned correctly, brace them with stakes. Tamp the ground at the base of the post and bag up the dirt. When tamping, do not disrupt the post alignment.

4. Connect the rails to the posts on the fence
Attach the bottom and the top of the rail to the posts of the fence. As compared to the top of the post, secure the rail to the body of the post. To get this done, you should use a butt joint. The simple wood joint, where the ends of the rails are balanced and put together is a butt joint. This is done in order to protect the fence. You have to make sure that you are correctly matched with the bottom and top rails so that it is not unsightly.

5. Install boards for the fence
This gives a smooth and vertical look to the fence. At one of the corners, patch the first board. To make sure that the board is nailed into position and is vertical, the fence post must have a plumb level. You can repair the board in place at another fence post angle. On top of both boards, placed the string thread. Nail it into place until every board has been mounted and keep repeating the process. When required, change the boards accordingly.